You are here

Ignition Switch - Removal and Installation (1966-1977)

To replace the ignition switch first remove the key cylinder:

1. Insert key and turn to the "ACC" position.
2. Insert a paperclip or stiff wire into the hole on the bottom right of key cylinder.
3. Turn the key cylinder past "ACC" counter-clockwise (about 1/8 - 1/4 turn).
4. Pull key and key cylinder out of ignition switch housing.

Remove the ignition switch from the dashboard.

1. Hold the front bezel in, and from the back (under the dash), push the ignition switch in, and turn 1/8 turn counter-clockwise, and remove the switch.
2. Remove all the wires from the back of the switch.

Taxonomy upgrade extras: